1, the machine is dealing with hot compression or injection molding of the thermosetting plastic products of the burr, approved front. Clear the designed dedicated flash processor.
2, the projection of sand by the high-speed rotation of the impeller projected on the plastic products, for the hole in the burr, flake and convex where the burr removed. The size of the projection force can be controlled
The inverter on the panel adjusts the appropriate number of revolutions.
3, the machine is equipped with a vibrating screen and compact circulation system, sand material can be used continuously, powdery burr and very small cast sand material is collected by the dust collector, and larger
The edge of the piece is filtered out by the screen.
4, the machine in the sand recycling system with anti-static liquid motor and nozzle, can reduce the burr and dust attached. And can increase the life of the projection sand material.
5, spray room for the belt conveyor, indoor all the laying of rubber. Put the product in the ring with the rotation while stirring by the impeller throwing sand hit the surface to remove the burr
Effect.
6, the machine is by the self-type projection device, chassis, roller conveyor, dust collector, and other components of one machine. Is a simple appearance - no space efficiency and high can reduce the powder
Dust blasting sandblasting machine.
7, this machine can be used with different sand materials, plastic particles, walnut sand, resin sand, nylon sand and so on.
8, according to product needs to produce different size models and choose different sand materials.
9, the machine can also be equipped with automatic high-end sub-screening mechanism, 100% sieve sand in the burr and dust.
model
|
Area
|
Workspace
|
Feed size
|
power supply
|
Dust collector
|
Air compressor
|
ZS-1000R
|
1000*1030*1760
|
650*760*660
|
620*650
|
Three-phase 380V
|
1HP
|
10HP
|