Features:
1, the machine is to deal with hot compression or injection molding of hot rigid plastic products of the burr, approved the front, clear the design of the dedicated burr processor.
2, the projection of sand by the high-speed rotation of the impeller projected on the plastic products, for the hole in the burr, flake and convex where the burr removed. The size of the projection force can be adjusted in the control panel on the inverter keyboard the appropriate number of revolutions.
3, the machine is equipped with a vibrating screen and compact circulatory system, sand material can be used continuously, powdery burr and very small cast sand is collected by the dust collector, while the larger piece of the edge was screen filter come out.
4, the machine in the sand recycling system with anti-static liquid motor and nozzle, the appropriate moisture can be more strong spray effect, can reduce the burr and dust attached. And can increase the life of the projection sand material.
5, spray room for the belt conveyor, indoor all the laying of rubber. Put the product in the ring with the rotation while stirring by the impeller of the sand hit the surface to achieve the effect of removing the burr.
6, the machine is by the self-propelled projection device, chassis, belt conveyor, dust collector and other devices together. Is a simple appearance, do not take up space efficiency and high dust pollution can reduce the sandblasting machine.
8, this machine can be used different sand materials, after plastic materials, walnut sand, resin sand and so on.
9, according to product needs to produce different size models and the selection of different sand materials.
use:
Applicable to bakelite, skeleton, ABS, DAP, LCP, PPS and other thermosetting plastic material to remove the burrs.
Model Area Area Workspace Feeder Size Power Dust Collector Air Compressor
ZS-1000A 1000 * 1030 * 1760 650 * 760 * 660 620 * 650 Three-phase 380V 1HP 3HP